Need help?Do you have a question about the Honeywell RAEGuard 2 PID and is the answer not in the manual?
General| Sensor Type | Photoionization Detector (PID) |
|---|---|
| Target Gas | Volatile Organic Compounds (VOCs) |
| Operating Temperature | -20°C to +50°C (-4°F to +122°F) |
| Output Signal | 4-20 mA, RS-485 Modbus |
| Ingress Protection | IP65 |
| Operating Humidity | 0 to 95% RH (non-condensing) |
| Display | LCD |
Detailed technical specifications including basic, environmental, physical, and certification parameters.
Instructions and diagrams for mounting the RAEGuard 2 PID unit to walls or poles.
Step-by-step guide for safely taking apart the RAEGuard 2 PID for servicing and maintenance.
Details on connecting the RAEGuard 2 PID to peripheral equipment using terminal blocks.
Step-by-step instructions for connecting wires to the terminal blocks for proper operation.
Procedures for proper external and internal earth grounding of the RAEGuard 2 PID.
Configuration of alarm relays (normally open/closed) for external signals like lights or buzzers.
Overview of the RAEGuard 2 PID's display, status LED, and magnetic key interface.
Description of the magnetic key used for interacting with the device's interface.
Instructions on how to use the magnetic key to navigate the RAEGuard 2 PID interface.
Describes the startup sequence, self-test, and warm-up process of the RAEGuard 2 PID.
Explains how the RAEGuard 2 PID displays gas concentration and status indicators.
Details on interpreting the various status indicators, LEDs, and LCD messages on the device.
To Next Page