RLV430
11
The Economy mode can be used as follows:
Place the thermostat in Economy mode during your absence.
When you arrive, place the thermostat in Automatic mode or in Manual
mode before the temperature drops to the economy level.
When you leave, switch the thermostat back to Economy mode.
To program the two periods of the Economy mode:
n Press the Mode button until Econo appears on the screen.
o Press the Pgm button. Period 1 is displayed.
p Press the Hour and Min buttons to set the start time of the displayed period.
q Press the Up or Down button to set the temperature.
r Press the Pgm button to select Period 2.
s Repeat steps 3 through 5 to set Period 2.
t Press the button to end programming.
Temporary Override
You can temporarily override the current temperature using the Up or Down but-
ton. The new setpoint will be used until the end of the current period. Econo
flashes during the override. You can cancel the override by pressing the but-
ton.
Economy mode (cont’d)
400-104-010-D_69-1855EF (RLV430 Honeywell TH104) ENG.fm Page 11 Monday, August 31, 2009 1:16 PM
To Next Page
Loading...
