Honeywell RLV430 - Manual Mode (Permanent Override of Schedule); Resetting the thermostat (default settings)

Owner’s Guide
12
To place the thermostat in Manual mode, press the Mode button
until Man appears on the screen. In this mode, any modification
to the temperature must be done manually. Press the Up or
Down button to set the temperature. The default setting is
21.0°C (70°F).
WARNING: All parameters, except the clock (time and day), return to their default
settings when the thermostat is reset.
n Press the Mode button until Econo appears on the screen.
o Press the button for 6 seconds.
p The thermostat will display rSt (reset) for 2 seconds to indicate it is reset
and will then return to normal display.
Manual mode (permanent override of schedule)
Resetting the thermostat (default settings)
400-104-010-D_69-1855EF (RLV430 Honeywell TH104) ENG.fm Page 12 Monday, August 31, 2009 1:16 PM