Honeywell RLV430 - Setting the Clock and Day; Configuration

RLV430
7
The clock must be set when the time is incorrect or flashes on the screen.
n Press the Day button to set the day.
o Use the Hour and Min buttons to set the clock.
p Press the button to exit.
n Press the Pgm button for 3 seconds. The first parameter is displayed.
o To display the next parameter, press the Pgm button.
p To modify the displayed parameter, press the Up or Down button.
q To exit the menu, press the button or do not press any button for 1
minute.
* Place at Yes if you have a fan-forced heater (to prevent premature burnout of the motor).
Leave at No for better temperature regulation if you do not have a fan-forced heater.
Setting the clock and day
Configuration
Display Parameter Options Default setting
Temperature unit °C / °F °C
Time format 12 hr / 24 hr 24 hr
Fan
*
No / Yes No
400-104-010-D_69-1855EF (RLV430 Honeywell TH104) ENG.fm Page 7 Monday, August 31, 2009 1:16 PM