Honeywell RLV4300 - Temperature Display and Setting

RLV4300
11
The thermostat normally displays the room (measured)
temperature.
• To display the set temperature (setpoint), press the Up or
Down button once. The setpoint temperature will remain
on the screen for 5 seconds.
• To change the setpoint temperature, press the Up or Down
button repeatedly until the desired temperature is
displayed.
• The screen is backlit for 12 seconds when any button is
pressed.
Temperature display and setting
69-1918EF-03.book Page 11 Wednesday, March 20, 2013 4:24 PM