EasyManua.ls Logo

Honeywell RTH2300 - Fan Operation Control; Auto and On Fan Settings

Honeywell RTH2300
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 to 6 cycles per hour
Protection
Press the button to select compressor protection:
Damage can occur if the compressor is restarted too soon after shutdown. This feature forces the compressor to wait
5 minutes before restarting. During the wait time, the message Cool On or Heat On flashes on the screen. When the
safe wait time has elapsed, the message stops flashing and the compressor turns on.
When correct setting is selected, press the buttons to save any changes and exit the menu.
For assistance with this product, please visit http://yourhome.honeywell.com or call Honeywell Customer Care toll-
free at 1-800-468-1502.
One Year Warranty
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under
normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during
the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at
Honeywell’s option).
If the product is defective,
1. return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it; or
2. call Honeywell Customer Care at 1-800-468-1502. Customer Care will make the determination whether the
product should be returned to the following address: Honeywell Return Goods, Dock 4 MN10-3860, 1885
Douglas Dr. N., Golden Valley, MN 55422, or whether a replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell
that the defect or malfunction was caused by damage which occurred while the product was in the possession of a
consumer.

Other manuals for Honeywell RTH2300

Related product manuals