RTH6350/RTH6450 Series
15 69-2415ES—04
About your new thermostat
Use this feature in climates where both air conditioning and heating are used on the
same day. When the system mode is in Auto, the thermostat automatically selects
heating or cooling depending on the indoor temperature.
While in the Auto mode, if a schedule override takes place (temporarily or perma-
nently) the thermostat will automatically adjust the cooling and heating settings to
maintain a 3-degree separation between the cool and heat settings.
For example, if the heat temperature is raised to where it gets within 3-dgrees of the
coolsetting,thedisplaywillshowanuparrownextto“cool”toshowthethermostat
is raising the cool setting up to maintain a 3-dgreee separation.
Press the Select Heat/Cool button to select between the heat and cool to view/adjust
either mode.
Auto Changeover (RTH6450 only)
69-2415ES_B.indd 15 3/22/2011 12:56:02 PM
To Next Page
Loading...
