12. Determine your heating/cooling system type.If your system type is conventional single
stage, continue to “Connecting to your Wi-Fi network” on page 27.
If your system is:
• Conventional multistage heat and cool
• Heat pump without backup heat
• Heat pump with backup heat
• Heat only
• Cool only
See page 51 to match your thermostat to your system type, then continue to “Connecting to your
Wi-Fi network” on page 27.
If you are not sure of your heating/cooling system type or have other questions, go to
wifithermostat.com
To complete this process, you must have a wireless device connected to your home wireless network.
Any of these device types will work:
Laptop (recommended)
Tablet (recommended)
Smartphone
If you get stuck… at any point in this procedure, restart the thermostat by removing the thermostat
from the wallplate, wait for 5 seconds, and snap it back onto the wallplate. Return to Step 1 in this
procedure, which starts on the next page.
Read More About:
Honeywell WiFi Touchscreen Thermostat – Programming Manual
Honeywell WiFi Touchscreen Thermostat Manual – Optimized PDF
Honeywell WiFi Touchscreen Thermostat Manual – Original PDF
To Next Page
Loading...
