Preset energy-saving schedules
This thermostat is pre-set with energy-saving program settings for four time periods. Using the default
settings can reduce your heating/cooling expenses by as much as 33% if used as directed. Savings
may vary depending on geographic region and usage.
Setting up your thermostat
Setting up your Wi-Fi programmable touchscreen thermostat is easy. It is preprogrammed and ready
to go as soon as it is installed and registered.
1. Install your thermostat.
2. Connect it to your home wireless network.
3. Register online for remote access.
Before you begin, you may want to watch a brief installation video. Use the QR Code® at the front of
this guide, or go to wifithermostat.com.
Installing your thermostat
You might need the following tools to install this thermostat:
No. 2 Phillips screwdriver
Small pocket screwdriver
Pencil
Level (optional)
Drill and bits (3/16” for drywall, 7/32” for plaster) (optional)
To Next Page
Loading...
