Honeywell RTH8580ZW - System Setup and Configuration; Time, Date, and Schedule Settings; System Type Selection

17 33-00131ES—01
System setup
How do I change time and date settings? (See page 16 for instructions.)
Function Settings & Options
0120
Year Setting
(rst two digits)
20 = Year 20xx
21 = Year 21xx
0130
Year Setting
(last two digits)
01–99 (i.e., 2001–2099)
0140
Month Setting 01–12 (i.e., January–December)
0150
Date Setting 01–31
0160
Schedule Options
4 Program schedule is on (7-day programmable).
0 Program schedule is off. Thermostat cannot be programmed.
0165
Restore Schedule
Defaults
0 Continue using programmed schedule.
1 Restore thermostat program to energy saving settings
How do I set my heating/cooling system type? (See page 16 for instructions.)
Function Settings & Options
0170
Select System
Type
If you are not sure of
your heating/cooling
system type or have
other questions,
go to
http://yourhome.
honeywell.com
1 Heat/cool: Gas, oil or electric heating with central air conditioning.
2 Heat pump: Heat pump without backup or auxiliary heat.
3 Heat only (2-wire systems):
4 Heat only with fan: Gas, oil or electric heat without central air
conditioning.
5 Heat only (no fan): Gas, oil or hot water heat without central air
conditioning.
6 Cool only: Central air conditioning only.
7 Heat pump: Heat pump with backup or auxiliary heating.
8 Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 2
cooling stages (wires on Y and Y2).
9 Heat/Cool Multiple stages: 2 heat stages (wires on W and W2), 1
cooling stage (wire on Y).
10 Heat/Cool Multiple stages: 1 heat stage (wire on W), 2 cooling stages
(wires on Y and Y2).
11 2Heat/2Cool Heat Pump (no aux. heat):
12 3Heat/2Cool Heat Pump (with aux. heat):