Do you have a question about the Honeywell S4965 Series and is the answer not in the manual?
Frequency | 50/60 Hz |
---|---|
Enclosure Rating | NEMA 1 |
Application | Gas-fired appliances |
Type | Flame safeguard control |
Ignition Trial Time | 10 seconds |
Humidity Range | 95% RH non-condensing |
Terminals | Screw terminals |
Details on electrical connections for PCB components including spark, flame sensing, mains, and low voltage.
Parameters for flame sensing, including minimum current and response times.
Technical specifications for the ignition system, including voltage, frequency, and energy.
Timing parameters for various stages of boiler operation like pre-purge, ignition, and post-purge.
Guidelines for proper wiring practices, leadwire selection, and insulation requirements.
Information on external and integrated fusing for the boiler control, including mounting/demounting.
Specification for the maximum allowable spark gap for optimal ignition.
Procedure for checking flame current using a DC micro-Ampèremeter.
Ensuring all burner components function correctly after installation and adjustments.
States that no maintenance or service is required under normal circumstances.
Details on adjusting gas pressure using a PC tool and OS-specific instructions.
Lists European standards the S4965 is designed to meet, including EN 298 and EN 60730-1.
Confirms conformity with EC Directives like Gas Appliance, Low Voltage, and EMC.