7800 SERIES S7800A KEYBOARD DISPLAY MODULE
31
65-009
0-6
Press the down arrow to Save.
. . . LOCKOUT . . . . . . .
Fig. 74. LOCKOUT screen.
Using the left/right arrow will move the cursor left and right. Up
and down arrows will move you through the series of available
scripts (See Table 9). Up to 20 characters per line (you have
two lines available) can be used in your message.
NOTE: Moving through the scripts:
Call Service
Setup
Edit Screen: 1
Fig. 77. Call Service Setup screen.
Use the up arrow to go to screen 2 or 3. Repeat the above
steps for custom messages you wish to create. When
complete with your final message, press ENTER.
1. Pressing and holding an up/down arrow will fast
forward to the end of the current script.
Save
<
Clear
2. A space is located between the capital and lower
case alphabets.
3. A space is added if you move the cursor right
when it is under an empty character position.
Pressing the ENTER keys will show:
Exit
EOL
Fig. 78. Save/Exit/Clear EOL screen.
Use the up arrow to select Exit.
Save
<
Clear
Exit
EOL
DISPLAY
Setup
Select: CS EDIT
Fig. 75. Save/Exit/Clear EOL screen.
Pressing the left arrow will clear text on the line you are on and
return you to the CS Edit screen. When you have finished
entering your description, press the ENTER keys.
Fig. 79. DlSPLAY Setup/Select CS EDlT screen.
Use the up arrow to scroll to CS TEST item to view your
message. Return back to CS EDIT to make any corrections.
Use the up arrow to scroll to CS ON/OFF to turn on your
customer Call Service message.
Save
<
Clear
Press ENTER, then Exit if you are finished.
Exit
EOL
Fig. 76. Save/Exit/Clear EOL screen.
To Next Page
Loading...
