Honeywell Small SATCOM - Indoor Unit Mounting

B. Indoor Unit Mounting
(1)TheindoorunitshouldbemountedintheavionicsbayoftheUAV.
(2)Theindoorunitmaybemountedinanyorientation
–Thelabelisontheback,exteriorfaceoftheIndoorUnit.
(3)Theindoorunit’senvironmentshouldbemaintainedwithinitsenvironmentalparameters.
–Anti-vibrationmounts(notsupplied)canbeusedtoreducetheseverityofthevibration.
(4)Theindoorunitshouldbeboltedtothefloor oftheavionicsbayorontheexternalfuselagewith
4M4boltsandtorquedto2.0to2.4N.m.
NOTE
:MountingHardwarenotincluded.Hardwaretobesuppliedbycustomerbased
oninstallation.
(5)TheSIMcardshouldbefullyinsertedintotheSIMcardslotonthefrontfaceoftheindoorunit.
(6) To ensure that the indoor unit can dissipate heat, refer to Paragraph 7.B.
(7) Refer to Figure 6 for Indoor Unit dimensions.
Page 16
18 Feb 2021
©HoneywellInternationalInc.DonotcopywithoutexpresspermissionofHoneywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
SMALL SATCOM