Honeywell SMV 3000 Specification And Model Selection Guide

SMV 3000 Smart Multivariable Flow Transmitter
Measurements and Calculations:
• Differential Pressure
•
Absolute or Gauge Pressure
• Process Temperature via 100 ohm Pt. RTD or Type J,K,T or E Thermocouple
•
Mass or Volumetric Flow Rate of Air, Gases, Steam or Liquids
34-SM-03-01
7/04
Page 1 of 25
Specification and
Model Selection
Guide
Key Features
•
•
•
•
•
Unique single capsule sensor
design provides highly
accurate measurements of
differential pressure, absolute
or gauge pressure and meter
body temperature.
3 process measurements (DP,
SP and Temp.) and a flow
calculation from one
transmitter.
Flexible Electronics design
allows RTD or Thermocouple
Input with standard wiring.
“Smart” features include
remote communication,
calibration, configuration and
diagnostics.
Flexible software allows flow
calculation for liquids, gases
and steam.
Figure 1 —SMV 3000 Smart Multivariable Flow Transmitter with SCT
3000 Smart Configuration Toolkit. The SMV 3000 measures differential
pressure, static pressure and process temperature, and dynamically
calculates mass or volumetric flow rate based on these measurements.
SCT 3000 ordered separately under Specification 34-CT-03-02
•
•
•
Performs dynamic mass and
volume flowrate compensation
for Orifice meters and Laminar
Flow Elements for highest
accuracy.
Standard compensation
supports other primary flow
elements:
- Venturi
- Nozzle
- Averaging Pitot Tube
Digital integration with
Honeywell control systems
provides local measurement
accuracy to the system level
without adding typical A/D and
D/A converter errors.
.
Honeywell Process Solutions, 2500 W. Union Hills Rd., Phoenix, AZ 85027
Printed in U.S.A.. © Copyright 1997 — Honeywell Inc.

Honeywell SMV 3000 Specifications

General

Brand	Honeywell
Model	SMV 3000
Category	Transmitter
Language	English