Honeywell T1 Pro Installation Instructions

Home and Building Technologies
In the U.S.:
Honeywell
715 Peachtree Street NE
Atlanta, GA 30308
customer.honeywell.com
® U.S. Registered Trademark.
© 2018 Honeywell International Inc.
33-00189EFS—03 M.S. Rev. 01-18
Printed in U.S.A.
33-00189EFS-03
For assistance with this product, please visit
customer.honeywell.com.
Or call Honeywell Customer Care toll-free at
18004681502.
Customer assistance
Pull to remove the thermostat
from the UWP.
CAUTION: MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed
tube, do not place the old control in the trash. Contact your local waste
management authority for instructions regarding recycling and proper
disposal.
CAUTION: EQUIPMENT DAMAGE HAZARD
Compressor protection is bypassed during testing. To prevent equipment
damage, avoid cycling the compressor quickly.
CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before
beginning installation.
+

Honeywell T1 Pro Specifications

General

Model	T1 Pro
Programmable	Non-programmable
Power Source	Battery or Hardwired
Stages	1 Heat/1 Cool
Changeover	Manual
Geofencing	No
Remote Control	No
Warranty	1-Year Limited Warranty
Temperature Range	Heat 40-90 °F, Cool 50-99 °F
Display Type	LCD
Compatibility	Compatible with most single-stage heating, cooling, and heat pump systems