T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES
63-4355—2 2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Logistics
Honeywell Inc., 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386 (612) 951-1000
In Canada—Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario M2H 3N7.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
this unit might not exactly match the listed
specifications. This product is tested and calibrated
under closely controlled conditions, and some minor
differences in performance can be expected if those
conditions are changed.
Table 1. T7200 and T7300 Thermostat Features.
a
Wallplate provided.
b
Configured in Installer Setup.
Table 2. Q7300 Subbase Features.
Maximum Stages
Model Applications Subbase Required Heat Cool Changeover
b
Hookup Drawing No.
T7200D Conventional None
a
11
Automatic
19
T7200E Heat Pump None
a
11
or Manual
20
T7300D Conventional Q7300A, G, L 3 3 21-22, 27, 33-34
T7300E Heat Pump Q7300C, D 3 2 23–26
T7300F
Conventional or
Q7300A, C, D, G, L 3 3 21-27, 33-34
T7300F
Heat Pump
Q7300H — — 28-31
Maximum Stages
a
Model Applications Thermostat
Required
Heat Cool Hookup
Drawing No.
Q7300A
b
Conventional T7300D, F 2 2 21-22
Q7300C
b
Heat Pump T7300E, F 3 2 23–25
Q7300D
b
Heat Pump T7300E, F 3 2 26
Q7300G
b
Conventional T7300D, F 3 3 27
Q7300H
c
Heat Pump T7300F 3 2 28
Q7300H
d
Heat Pump T7300F 3 2 29
Q7300H Conventional T7300F 3 3 30
Q7300H Conventional T7300F 2 1 31
Q7300L Conventional
e
T7300D, F 2 1 33-34
T7200/T7300 Thermostats:
T7200 and T7300 Thermostats provide features listed in
Table 1.
Q7300 Subbases:
Q7300 Subbases provide features listed in Table 2.
a
Wallplate only.
b
All subbases are down selectable and can be configured to
control fewer stages than the maximum allowed.
c
With O/B terminals.
d
Without O/B terminals.
e
Used with ML7984 Actuator and V5011 or V5013 Valve.
To Next Page
Loading...
Need help?
General
