Note: Make sure the thermostat is set to the system you want to control (heat or cool).
the temperature. This will override the temperature settings for all time periods.
The “Hold” feature turns off the program schedule and allows you to adjust the thermostat manually, as needed.
Whatever temperature you set will be maintained 24 hours a day, until you manually change it, or press RUN to cancel
“Hold” and resume the program schedule.
This feature helps prevent damage to the compressor in your air conditioning or heat pump system.
Adaptive Intelligent Recovery (AIR)
Adaptive Intelligent Recovery eliminates guesswork when setting your schedule. It allows the thermostat to “learn” how
long your furnace and air conditioner take to reach the temperature you want.
Just set your program schedule to the time you want the house to reach your desired temperature. The thermostat then
turns on the heating or cooling at just the right time to reach your scheduled temperature at your scheduled time.
For example: Set the Wake time to 6 am and the temperature to 21°. The heat will come on before 6 am, so the
temperature is 21° by the time you wake at 6.
Built-in compressor protection
To Next Page
Loading...
Need help?
General
