TH7000 Series
3
About your new thermostat
69-2667ES—01
Your new thermostat is pre-programmed and ready to go. Just set the time and day. Then
check the settings below and change if needed:
1. Set clock .......................................................................................................... See page 6
2. Select fan setting: Preset to Auto ....................................................................See page 7
3. Select system setting: Preset to Heat ............................................................. See page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ...........................................................................See pages 9-11
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 11-13).
This thermostat is ready to go!
To Next Page
Loading...
Need help?
General
