Honeywell TH8000 Series Operating Manual

TH8000 Series
3 69-1912ES—06
About your new thermostat
Your new thermostat is pre-programmed and ready to go. Just set the time and day. Then
check the settings below and change if needed:
1. Set clock ......................................................................................................... See page 6
2. Select fan setting: Preset to Auto ................................................................. See page 7
3. Select system setting: Preset to Heat .......................................................... See page 8
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm) ......................................................................... See pages 10-13
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 12-14).
This thermostat is ready to go!

Honeywell TH8000 Series Specifications

General

Programmable	Yes
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Display	Touchscreen
Programmability	7-day programmable or non-programmable (depending on model and user selection)
Features	Touchscreen
Programs	4 periods per day
Backup Battery	Optional (AA batteries)
Humidity Control	No
Power Source	Battery and/or Hardwired