Honeywell TH8000 Series Operating Manual

TH8000 Series
7 69-1912ES—06
Press FAN to select fan operation, then press
DONE.
• On: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is on.
• Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press FAN to override the fan settings
you’ve programmed for different time periods
(see page 11). If you select On or Circ, the set-
ting you select will remain active until you press
FAN again to select Auto (see page 27 for more
information).
Press FAN
SCHED HOLD CLOCK SCREEN MORE
WED
AM
SYSTEM
HEAT
Following
Schedule
Inside
Set To
70
6:01
70
FAN
AUTO
Fan setting
Note: If a fan schedule is programmed,
“Auto” will run the fan schedule.

Honeywell TH8000 Series Specifications

General

Programmable	Yes
Operating Modes	Heat, Cool, Auto, Off
Fan Modes	Auto, On, Circulate
Display	Touchscreen
Programmability	7-day programmable or non-programmable (depending on model and user selection)
Features	Touchscreen
Programs	4 periods per day
Backup Battery	Optional (AA batteries)
Humidity Control	No
Power Source	Battery and/or Hardwired