Honeywell touchpoint Pro - 3 IT System Architecture; Ethernet Remote Connections; Physical and Local Connections

IT ARCHITECTURE
Touchpoint Pro
Pt. No. 2400M2567_1 6 Security Guide
3 IT System Architecture
Touchpoint Pro may be configured in a variety of network topologies, from simple peer to peer or isolated LAN to a corporate
network with internet access.
This guide is primarily concerned with systems connected to a WAN or corporate network with possible Internet access.
Figure 1. System Architecture Options
3.1 Ethernet Remote Connections
Possible Ethernet connections include:
Connection
Scope
Remark
PC Configuration Tool
Intranet or internet
Single user permitted
Webserver clients
Intranet or internet
Multiple clients
Ethernet printer
Intranet or internet. Typically intranet.
Single printer supported
Webserver Setup
Intranet or internet. Typically intranet.
Short term single user access
Table 2. Connections via Ethernet
3.2 Physical and Local connections
Physical connections are:
• Touch screen/front panel
• USB memory device
• SD memory device
Webserver
client(s)
SD card
USB MemoryPrinter
Remote PC
Configuration
Local PC
Configuration or
Webserver setup
Internet over https
Local firewall or DMZ
Internet over VPN