Honeywell UtilityPRO Series

UtilityPRO
TM
Series
11 69-2539EFS—01
Getting StartedUtilityPro
®
FeaturesFan Settings
Press FAN to select fan operation, then press
DONE.
• ON: Fan is always on.
• Auto: Fan runs only when the heating
or cooling system is ON.
• Circ: Fan runs randomly, about 35%
of the time, not counting any run time
with the heating or cooling system.
You can press FAN to override the fan settings
you’ve programmed for different time periods.
If you select ON or Circ, the setting you select
remains active until you press FAN again to
select Auto.
Press FAN
SUN
MCR32579
USAGE
AM
Note: If a fan schedule is programmed,
“Auto” runs the fan schedule.