8 - 4
Resetting the Factory Defaults
If you aren’t sure what programming options are in your scanner, or you’ve
changed some options and want to restore the scanner to factory default set-
tings, first scan the Remove Custom Defaults bar code, then scan Activate
Defaults. This resets the scanner to the factory default settings.
The Menu Commands, beginning on page 9-5 list the factory default settings for
each of the commands (indicated by an asterisk (*) on the programming pages).
This selection erases all your settings and resets the scanner to the
original factory defaults. It also disables all plugins.
Remove Custom Defaults
Activate Defaults
To Next Page
Loading...
