To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Voyager 1472g and is the answer not in the manual?
General| Environmental Sealing | IP42 |
|---|---|
| Expected Duration of Operation | 14 hours |
| Expected Charge Time | 4.5 hours |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| IP Rating | IP42 |
| Weight | 210 g (7.4 oz) |
| Connectivity | Bluetooth, USB |
| Scan Pattern | Area Image |
| Decode Capability | 1D |
| Battery | 2400 mAh Li-ion |
| Drop Specification | 1.5 m (5 ft) to concrete |
| Number of Scans | 50, 000 scans per charge |
| Interface | USB, RS232, Keyboard Wedge, IBM 46xx (RS485) |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Dimensions | 173 mm x 62 mm x 82 mm (6.8 in x 2.4 in x 3.2 in) |
| Motion Tolerance | Up to 70 cm/s (27.6 in/s) for 13 mil UPC |
| Scan Technology | Area Imaging |
Details how to connect the scanner via USB, Keyboard Wedge, RS232 Serial Port, and RS485 interfaces.
Guides on configuring interfaces like Keyboard Wedge, RS232, USB, and RS485 using Plug and Play codes.
Explains cordless operation, RF modules, system conditions, and linking scanners to bases/APs.
Details using batch mode for data storage when out of range or for inventory, including modes and settings.
Guides on connecting the scanner to Bluetooth devices, covering pairing, PIN codes, and network activity settings.
Allows adding/clearing prefixes/suffixes and managing data formats for custom barcode output.
Covers enabling/disabling symbologies and setting valid reading lengths for barcode data.
Introduces the PC-based tool for scanner configuration, firmware upgrades, and parameter management.
Guides on resetting scanner settings to factory defaults or custom defaults.
