Honeywell Voyager 1472g User Manual

74 Voyager XP User Guide
Beep on BEL Character
You may wish to force the scanner to beep upon a command sent from the host. If
you scan the Beep on BEL On barcode below, the scanner will beep every time a
BEL character is received from the host. Default = Beep on BEL Off.
Trigger Click
To hear an audible click every time the scanner trigger is pressed, scan the Trigger
Click On barcode below. Scan the Trigger Click Off code if you don’t wish to hear
the click. (This feature has no effect on serial or automatic triggering.) Default =
Trigger Click Off.
Good Read and Error Indicators
Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this
option off, only turns off the beeper response to a good read indication. All error
and menu beeps are still audible. Default = Beeper - Good Read On.
*Beep on BEL Off
Beep on BEL On
*Trigger Click Off
Trigger Click On
Beeper - Good Read Off
* Beeper - Good Read On

Honeywell Voyager 1472g Specifications

General

Environmental Sealing	IP42
Expected Duration of Operation	14 hours
Expected Charge Time	4.5 hours
Operating Temperature	0°C to 50°C (32°F to 122°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
IP Rating	IP42
Weight	210 g (7.4 oz)
Connectivity	Bluetooth, USB
Scan Pattern	Area Image
Decode Capability	1D
Battery	2400 mAh Li-ion
Drop Specification	1.5 m (5 ft) to concrete
Number of Scans	50, 000 scans per charge
Interface	USB, RS232, Keyboard Wedge, IBM 46xx (RS485)
Humidity	5% to 95% relative humidity, non-condensing
Dimensions	173 mm x 62 mm x 82 mm (6.8 in x 2.4 in x 3.2 in)
Motion Tolerance	Up to 70 cm/s (27.6 in/s) for 13 mil UPC
Scan Technology	Area Imaging