EasyManuals Logo

Honeywell Voyager 1472g User Manual

Honeywell Voyager 1472g
247 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
108 Voyager XP User Guide
Miscellaneous Commands
Suppress characters
FB Suppress all occurrences of up to 15 different characters, starting at the current
cursor position, as the cursor is advanced by other commands. When the FC
command is encountered, the suppress function is terminated. The cursor is not
moved by the FB command.
Syntax = FBnnxxyy . .zz where nn is a count of the number of suppressed characters
in the list, and xxyy .. zz is the list of characters to be suppressed.
FB Example: Remove spaces in barcode data
This example shows a barcode that has spaces in the data. You may want to remove
the spaces before sending the data. Using the barcode above:
Command string: FB0120F10D
FB is the “Suppress characters” command
01 is the number of character types to be suppressed
20 is the hex value for a space
F1 is the “Send all characters” command
0D is the hex value for a CR
The data is output as:
34567890
<CR>
Stop suppressing characters
FC Disables suppress filter and clear all suppressed characters. Syntax = FC.
Replace characters
E4 Replaces up to 15 characters in the output message, without moving the cursor.
Replacement continues until the E5 command is encountered. Syntax =
E4nnxx
1
xx
2
yy
1
yy
2
...zz
1
zz
2
where nn is the total count of the number of characters
in the list (characters to be replaced plus replacement characters); xx
1
defines
characters to be replaced and xx
2
defines replacement characters, continuing
through zz
1
and zz
2
.
E4 Example: Replace zeros with CRs in barcode data

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell Voyager 1472g and is the answer not in the manual?

Honeywell Voyager 1472g Specifications

General IconGeneral
Environmental SealingIP42
Expected Duration of Operation14 hours
Expected Charge Time4.5 hours
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
IP RatingIP42
Weight210 g (7.4 oz)
ConnectivityBluetooth, USB
Scan PatternArea Image
Decode Capability1D
Battery2400 mAh Li-ion
Drop Specification1.5 m (5 ft) to concrete
Number of Scans50, 000 scans per charge
InterfaceUSB, RS232, Keyboard Wedge, IBM 46xx (RS485)
Humidity5% to 95% relative humidity, non-condensing
Dimensions173 mm x 62 mm x 82 mm (6.8 in x 2.4 in x 3.2 in)
Motion ToleranceUp to 70 cm/s (27.6 in/s) for 13 mil UPC
Scan TechnologyArea Imaging

Related product manuals