To Next PageTo Next PageWhy is my Honeywell Vuquest 3320g Scanner not reading symbols well?
To ensure your Honeywell Scanner reads barcodes properly, verify that the symbols are not smeared, rough, scratched, or exhibiting voids. Also, check that the symbols aren’t coated with frost or water droplets on the surface. Finally, make sure the barcode is enabled in the scanner or in the decoder to which the scanner connects.
What to do if the barcode is displayed but not entered with Honeywell Scanner?
If your Honeywell Scanner barcode is displayed but not entered, you need to program a suffix. Programming a suffix enables the scanner to output the barcode data plus the key you need (such as “CR”) to enter the data into your application.
How to fix Honeywell Vuquest 3320g that won’t read barcode?
If your Honeywell Scanner won’t read the barcode at all: 1. Scan the sample barcodes in the Programming Chart to check if your barcode is readable. 2. If the scanner still can’t read the sample barcodes, scan All Symbologies On. 3. Refer to Activate Custom Defaults On.
How to troubleshoot Honeywell Vuquest 3320g Scanner aimer that isn’t illuminated?
If the aimer isn’t illuminated on your Honeywell Scanner: * Check that the cable is connected properly. * Check that the host system power is On (if external power isn’t used). * Check that the button works.
General| Type | Fixed bar code reader |
|---|---|
| Sensor type | Photo diode |
| Scanner type | 1D |
| Yaw reading angle | -65 - 65 ° |
| Pitch reading angle | -45 - 45 ° |
| Light levels (direct sunlight) | 0 - 100000 lx |
| Linear (1D) barcodes supported | PDF417 |
| 2D (matrix & stacked) barcodes supported | - |
| Input voltage | 5 V |
| Power consumption | 450 mA |
| Power source type | DC |
| Power consumption (standby) | 0.45 W |
| Power consumption (typical) | 2.3 W |
| Standard interfaces | RS-232, USB, Keyboard wedge |
| Connectivity technology | Wired |
| Product color | Gray |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Harmonized System (HS) code | 84716070 |
Weight and Dimensions| Depth | 26 mm |
|---|---|
| Width | 51 mm |
| Height | 73 mm |
| Weight | 77 g |
