5
Setup options define the type of system you are installing and preferences for the
display.
1 Follow prompts on the screen to select the appropriate options. Among the
screens you might see will be options for:
1.1 Application, either Residential or
Commercial.
1.2 Thermostat Name, which will enable
you to identify it if you’re installing
more than one thermostat (for a zoned
HVAC application, for instance).
1.3 Thermostat Type, either programmable
or not, depending on preference.
1.4 Temperature scale, either Fahrenheit
or Celsius.
1.5 Use outdoor temp.
NOTE: Choose WIRED/SENSOR if your
application will require a wired sensor, or
will use the Internet for weather data.
1.6 The type of heating system.
1.7 For all installer options, press the s or
t buttons to change the option.
1.8 Press Next to move to the next setting,
and Done when setup is complete.
Performing installer setup
APPLICATION
residential
THERMOSTAT TYPE
programmable
THERMOSTAT NAME
THERMOSTAT
TEMPERATURE SCALE
fahrenheit
HEATING SYSTEM
conv. forced air
USE OUTDOOR TEMP
wired / sensor
To Next Page
Loading...
