2 Xenon XP User Guide
Connect the Device
Connect with USB
A scanner or a cordless base can be connected to the USB port of a computer.
1. Connect the appropriate interface cable to the device first, then to the com-
puter.
Note: The power supply must be ordered separately, if needed.
2. If you are connecting a CCB01-010BT/CCB01-010BT-BF or CCB-H-010BT/
CCB-H-010BT-BF base horizontally, make sure the cables are secured in the
wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
If you are connecting a CCB-H-010BT/CCB-H-010BT-BF
Base vertically, see Mount a CCB-H-010BT/CCB-H-010BT-BF Charge Base on
page 10.
Corded Xenon XP Scanner USB Connection:
CCB01-010BT/CCB01-010BT-BF Base USB Connection:
To Next Page
Loading...
