6 Xenon XP User Guide
Connect with RS232 Serial Port
1. Turn off power to the terminal/computer.
2. Connect the appropriate interface cable to the scanner.
Note: For the scanner or cordless base to work properly, you must have the correct cable for
your type of terminal/computer.
Note: The power supply must be ordered separately, if needed.
3. If you are connecting a CCB01-010BT/CCB01-010BT-BF or CCB-H-010BT/
CCB-H-010BT-BF base horizontally, make sure the cables are secured in the
wireways in the bottom of the cordless base and the base sits flat on a
horizontal surface.
If you are connecting a CCB-H-010BT/CCB-H-010BT-BF
Corded Xenon XP Scanner RS232 Serial Port Connection:
To Next Page
Loading...
