Locked
10
If you link a scanner to a base using the Locked Link Mode,
other scanners are blocked from being linked if they are inad-
vertently placed into the base. If you do place a different scan-
ner into the base, it will charge the scanner, but the scanner will
not be linked.
Locked Link Mode
(Single Scanner)
To use a different scanner, you need to unlink the original scan-
ner by scanning the
Unlink Scanner
bar code.
Override Locked Scanner
If you need to replace a broken or lost scanner that is linked to a
base, scan the
Override Locked Scanner
bar code with
a new scanner, and place that scanner in the base. The locked
link will be overridden; the broken or lost scanner’s link with the
base will be removed, and the new scanner will be linked.
Override Locked Scanner
To Next Page
Loading...
