Honeywell ZIO TR75-H User Manual

OPERATING GUIDE
63-2719-03
Zio
®
/Zio Plus LCD Wall Modules
TR70, TR71, TR75 with Sylk
®
Bus
APPLICATION
The Zio TR70 Series (TR70, TR70-H, TR71, TR71-H, TR75,
and TR75-H OS numbers) LCD Wall Modules provide an
operator interface for monitoring and adjusting parameters in
the wall module itself and in the programmable controller
(refer to the
Honeywell Spyder
®
User’s Guide, form 63-2662,
or the
ComfortPoint™ Programmable Controller User’s Guide,
form 63-2663, depending on the programmable controller
used) to which it is wired. The wall module may be customized
and supports both a contractor and a tenant user interface.
NOTE: This document illustrates the wall module configura-
tion process using information from the
Honeywell
Spyder User’s Guide
(form 63-2662).
The wall module has a snap in mounting to a subbase that
may be mounted on a wall, on a standard utility conduit box, or
on a 60 mm wall outlet box. Wiring connections to the wall
module are made through a cutout in the back of the wall
module.
All models have a space temperature sensor, network bus
jack, and an LCD panel with three softkeys and two Up/Down
adjustment keys. Models with -H also include an onboard
humidity sensor.
PREFACE
This Operating Guide is intended to provide configuration
information (using the Niagara Workbench tool) and a general
overview of the TR70 Series operator interface. Configuration
begins with “Initial Power-Up” on page 2, and the general
overview begins with “Operating the Zio Wall Module” on
page 19.
It is intended to guide you through the features and operation
of the TR70 Series as you interface with the programmable
controller and establish pre-programmed or custom
configurations.
Fig. 1. LCD Wall Module features.
Contents
Application ........................................................................ 1
Preface ............................................................................. 1
TR70 Series Features ....................................................... 2
Compatibility ............................................................. 2
Initial Power-Up ................................................................. 2
Setup and Configuration ................................................... 3
Initial Setup and Configuration .................................. 3
Selecting the Wall Module ......................................... 3
TR71/TR75 Labels .................................................... 3
Navigation and Memory Usage ................................. 3
Wall Module Configuration ........................................ 4
General Settings ................................................... 5
Categories and Parameters .................................. 5
Home Screen Options ........................................... 9
Occupancy and Override ...................................... 10
Fan Command ....................................................... 12
System Status and Command .............................. 13
Schedule/Time ...................................................... 14
Password ............................................................... 15
Preview .................................................................. 16
Completing the Setup and Configuration .................. 17
Operating the Zio Wall Module ......................................... 19
Contractor Mode Operation ...................................... 19
Tenant Mode Operation ............................................ 22
LCD PANEL
M27344
SOFTKEYS (3)
UP/DOWN
ARROW KEYS
NETWORK BUS PORT (ON BOTTOM OF CASE)

Honeywell ZIO TR75-H Specifications

General

Brand	Honeywell
Model	ZIO TR75-H
Category	Thermostat
Language	English

Summary

OPERATING GUIDE

APPLICATION

Describes the Zio TR70 Series LCD Wall Modules and their function as operator interfaces.

PREFACE

Introduces the document's purpose for configuration and overview of the TR70 Series interface.

TR70 SERIES FEATURES

Compatibility

Explains the compatibility of TR70 Series modules with different controllers and firmware.

INITIAL POWER-UP

Guides users through the initial power-up process for the wall module.

SETUP AND CONFIGURATION

Initial Setup and Configuration

Details configuring the wall module using the Niagara Workbench Tool.

TR71/TR75 Labels

Describes special characters allowed for labels on TR71/TR75 models.

Navigation and Memory Usage

Covers the Spyder Tool interface and memory usage information.

Navigation

Explains the navigation buttons on the wall module interface.

SAVE BUTTON

Memory Usage

Wall Module Configuration

General Settings

Categories and Parameters

CATEGORY DETAILS

Describes entering category names, descriptions, and parameter counts.

ADDING A PARAMETER

CUT/COPY/DELETE CATEGORIES AND PARAMETERS

PARAMETER TYPES AND LIMITS

ENUMERATED VALUES

HIGH/LOW LIMIT PARAMETER LINKING

Home Screen Options

DEFAULT HOME SCREEN

Explains how to set the default Home screen displayed to the tenant.

PREVIEW

Describes previewing Home screen configurations before applying them.

ADD OR CHANGE HOME SCREENS

Guides on creating, editing, and managing Home screen configurations.

Occupancy and Override

STANDARD SETTINGS

Covers basic settings for occupancy and override functions.

ADVANCED SETTINGS

Details advanced configurations for occupancy and override.

OCCUPANCY STATUS DISPLAY OPTIONS

Controls how occupancy and override status are displayed on the LCD.

OVERRIDE SETTINGS

TIMED OVERRIDE IN HOURS

TIMED OVERRIDE IN DAYS

Fan Command

STANDARD SETTINGS

Covers basic fan command settings.

ADVANCED SETTINGS

Details advanced fan command configurations.

System Status and Command

STANDARD SETTINGS

Covers basic system status and command settings.

ADVANCED SETTINGS

Details advanced system status and command configurations.

Schedule/Time

Schedule/Time for TR75

Details schedule/time options specific to the TR75 model.

Schedule/Time for TR70/TR71

Notes that schedule/time options are not supported for TR70/TR71.

Password

Preview

Completing the Setup and Configuration

Custom Configuration Saving

Describes saving custom configurations using the Save to Library feature.

Final Configuration Steps

Lists the final steps: preview, memory check, and finishing.

Link Slots on the Wire Sheet

OPERATING THE ZIO WALL MODULE

Contractor Mode (Entering and Exiting)

Describes how to enter and exit the setup function for contractor mode.

Contractor Mode Operation

Details advanced options and tenant view customization available in contractor mode.

Contractor Home Screen Softkeys

Explains the function of softkeys on the contractor Home screen.

SET VIEW MORE

PARAMETERS

Sample Contractor LCD Displays

Editing the Schedule or Time

Tenant Mode Operation

TENANT HOME SCREEN SOFTKEYS

Describes the softkeys available on the tenant's Home screen.

FAN

Explains how tenants can adjust fan settings based on configured options.

OVERRIDE

Explains how tenants can override occupancy settings.

SYSTEM & VIEW MORE

Tenant Home Screen Display