20.
Troubleshooting (continued)
Assembly & Disassembly of Main Brush and Floor Brush
2. Take out the main brush and floor brush.
3. Insert the main brush and floor brush
into the holes before closing the cover
in assembly.
Note: This robotic cleaner provides the
detachable end bearing structure for the
main brush and roller brush which makes
cleaning easy and efficient.
1. Force the locking bar forward and raise the
cover by your right thumb, then raise rod of
the main brush by your left hand.
5. Reinstall the filter in the original position.
Tip: The rubber cleaning head sometimes
might be dropped off when you clean the
dustbin, please follow the below instruction
to reinstall it.
Filter Replacement & Cleaning (Continued)
To Next Page
Loading...
