Hoover Impulse User Manual

18
Maintenance: Removing and Replacing the Brush Roll
Remove Powered Nozzle from Reach Wand.
Turn the Powered Nozzle upside down. Slide
the Brush Roll Release Button.
Clear any threads or hair from both ends of
the brush roll and any dirt or debris inside
the housing of the Powered Nozzle.
Lift the end of brush roll to remove from the
Powered Nozzle.
Re-fi t the brush roll into the housing.
1
3
2
4
WARNING
To reduce the risk of personal injury from moving parts, turn the power
switch to OFF and disconnect all accessories before servicing.

Hoover Impulse Specifications

General

Battery Type	Lithium-Ion
Power Source	Battery
Cordless	Yes
Bagless	Yes
Type	Stick
Charging Time	4 hours
Accessories	Crevice Tool