EasyManua.ls Logo

Hoover UH71100 - User Manual

Hoover UH71100
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Operating and Servicing Instructions
©2019 Techtronic Floor Care Technology Limited. All Rights Reserved. #961152124-R1
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
IF USED COMMERCIALLY WARRANTY IS VOID.
French - 15
Español - página 29
IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE.
Questions or concerns? For assistance, please call Customer Service at 1-800-944-9200
Mon-Fri 8am-7pm EST. PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
hoover.com

Table of Contents

Questions and Answers

  • K
    Kristy LopezAug 9, 2025
    Why does my Hoover Vacuum Cleaner have low suction?
    • B
      Beth SalinasAug 9, 2025
      There are several reasons why your Hoover Vacuum Cleaner might have low suction: 1. The filters could be dirty. 2. The dirt cup might be full or clogged. 3. The belt might be broken or worn. 4. The brushroll or hose could be clogged. 5. The carpet height setting might be incorrect.
  • J
    johnnyrobertsonAug 15, 2025
    What to do if my Hoover Vacuum Cleaner won't turn on?
    • J
      Jerry JohnsonAug 15, 2025
      If your Hoover Vacuum Cleaner won't turn on, consider these potential causes: * The power cord may not be firmly plugged into the outlet. Ensure it is securely plugged in. * A fuse may be blown, or a breaker may be tripped. Check the fuse or breaker in your home and replace the fuse or reset the breaker if necessary. * The Thermal Protector may have been activated. Unplug the vacuum and allow it to cool for 30 minutes, which will reset the thermal protector.
  • J
    jennifer72Aug 21, 2025
    Why is dust escaping from my Hoover UH71100 Vacuum Cleaner?
    • J
      Joel ShieldsAug 21, 2025
      If dust is escaping from your Hoover Vacuum Cleaner, it could be due to several reasons: * The dirt cup may be full. Empty the dirt cup. * The dirt cup may not be installed correctly. Review the dirt cup removal and replacement. * The hose may not be installed correctly. Review the hose installation. * The filters may not be installed completely. Review the filter removal and cleaning process.
  • T
    Thomas RodriguezAug 27, 2025
    Why does my Hoover UH71100 smell like it's burning?
    • S
      Savannah AllenAug 27, 2025
      A smoky or burning smell from your Hoover Vacuum Cleaner can be caused by: * A broken or stretched belt. You will need to replace the brushroll belt. * A clogged brushroll. Clear any debris from the brushroll.
  • T
    Thomas ChristianSep 2, 2025
    How to make my Hoover UH71100 easier to push?
    • L
      Lori GloverSep 2, 2025
      If your Hoover Vacuum Cleaner is difficult to push, the carpet height setting might be incorrect. Adjust the carpet height setting knob to the appropriate setting for the carpet you are cleaning.

Summary

How to Use

On-Off Switch

Explains how to turn the vacuum cleaner on and off.

Carpet Height Adjustment

Instructions for adjusting the vacuum height for different carpet types.

Maintenance

Dirt Cup: When to Empty

Instructions on how to empty the dirt cup for optimal performance.

How to Empty Dirt Cup

Detailed steps for removing and emptying the vacuum's dirt cup.

Filters: When to Clean

Guidance on cleaning the vacuum filters for optimal performance.

Brushroll: How to Clean

Steps for cleaning debris and hair from the vacuum brushroll.

How to Replace Belt

Detailed steps for replacing the vacuum belt.

Troubleshooting

Vacuum Wont Run

Solutions for when the vacuum cleaner fails to power on.

System Check Indicator Red or Low Suction

Troubleshooting for red indicator light or reduced suction.

Smoky;Burning Smell Detected

Diagnosing and fixing causes of unusual smells during operation.

Hoover UH71100 Specifications

General IconGeneral
BrandHoover
ModelUH71100
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals