Hoover UH73510 User Manual

11
Remove tool from handle.
Hold tool upside down
and flip clear plastic
brush guard to the
down position.
Push in the latch and
pull brush guard off.
Directions for Cleaning: Powered Stair Tool
***
2 31
To remove the brush roll,
pull the end without the
belt and then remove the
belt from the other end.
Cut out any hair and
remove large debris.
Replace brush roll,
belt and brush guard
for next use.
5 64
***Tools vary by model number. Refer to Hoover.com or Hoover.ca for tools included in each model.

Hoover UH73510 Specifications

General

Brand	Hoover
Model	UH73510
Category	Vacuum Cleaner
Language	English