What to do if the measured value is out of the measurement range on my Horiba Measuring Instruments?
If the measured value on your Horiba Measuring Instruments is out of the measurement range, it means the sample is out of the measurement range. Use a sample within the measurement range.
Why nothing appears when the power is turned ON on my Horiba Measuring Instruments?
If nothing appears when the power is turned ON on your Horiba Measuring Instruments, it could be due to: * Instrument defect: Consult your dealer. * Power is not supplied: Connect the AC adapter.
Why is the keypad swelling on my Horiba Measuring Instruments?
If the keypad on your Horiba Measuring Instruments is swelling, it could be due to: * Using the instrument at high elevation or other location where the air pressure is different from sea level: To eliminate the pressure difference between the inside and outside of the instrument, briefly open and then close the serial connector cover. After opening, correctly close the cover to maintain dust and water proofing. * Instrument defect: Consult your dealer.
General| pH Resolution | 0.01 pH |
|---|---|
| pH Accuracy | ±0.01 pH |
| mV Resolution | 1 mV |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.5 °C |
| Calibration Points | Up to 5 points |
| Connectivity | USB |
| Waterproof | IP67 |
| Temperature Compensation | Automatic |
| Display | LCD |
Details warranty terms and user responsibilities for the product.
Explains hazard levels (DANGER, WARNING, CAUTION) and warning symbols.
Provides critical safety measures for instrument and electrode handling.
Guidelines for safe and correct operation of the instrument.
Step-by-step guide to power on the benchtop meter.
Procedure for properly connecting electrodes to the instrument.
Detailed steps for calibrating the pH measurement function.
Procedure for calibrating the ORP/mV measurement.
Steps for calibrating ion concentration measurements.
Guide for calibrating electrical conductivity measurements.
Information on TDS calibration, noting it's derived from conductivity.
Procedure for calibrating salinity measurements.
Steps to calibrate the temperature sensor for accurate readings.
Configuration options for pH measurement and calibration settings.
Configuration options for ion measurement and calibration.
Configuration options for conductivity measurement and calibration.
Configuration options for Total Dissolved Solids (TDS) measurement.
Configuration options for salinity measurement.
Configuration options for managing data logging.
Configuration options for general instrument settings.
Procedure for setting the instrument's real-time clock.
Guidelines for cleaning and storing the main instrument.
Overview of maintaining and storing various types of electrodes.
Lists common error codes, their definitions, causes, and solutions.
Provides solutions for common problems like fluctuating values or connectivity issues.
Specifies the measurement range and resolution for pH.
To Next Page