Need help?Do you have a question about the horiba OCMA-500 and is the answer not in the manual?
General| Solvent | S-316 |
|---|---|
| Resolution | 0.1 mg/L |
| Detection Limit | 0.5 mg/L |
| Measurement Time | Approx. 3 minutes |
| Display | LCD |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 5-40°C |
| Operating Humidity | 85% RH or less (no condensation) |
| Measurement Method | Infrared absorption |
| Measurement Range | 0 - 500 mg/L |
| Repeatability | ±2% of full scale |
Details HORIBA's warranty terms and limitations for the OCMA-500 product.
Lists company and brand names as registered or standard trademarks.
Lists directives and standards the equipment conforms to, including EMC, Safety, and RoHS.
Specifies the recommended installation environment for the product, including category and degree.
Warns about FCC compliance limits for Class A digital devices and potential interference.
Explains hazard classifications (Danger, Warning, Caution) and warning symbols used in the manual.
Details precautions for electric shock, fire, chemical hazards, and handling.
Lists key precautions for operating and storing the OCMA-500, including solvent use and environmental conditions.
Explains the meaning of "Note", "Reference", and "Tip" annotations within the manual.
Introduces the OCMA-500 as an automated oil content analyzer and its measurement capabilities.
Lists the main unit and accessories included in the package, with quantities and images.
Identifies and describes the external parts of the OCMA-500 unit with a diagram.
Explains the function of each operation button on the OCMA-500, with a diagram.
Provides steps for placing the absorbent sheet on the tray inside the main unit.
Details the steps to power on the OCMA-500, including connecting the power cable.
Outlines the procedure for safely powering off the OCMA-500, including cleaning.
Explains how to manually initiate liquid drainage.
Covers pausing and handling errors during measurement or calibration sequences.
Lists crucial cautions before starting work, including chemical hazards and hygiene.
Lists required glassware and provides instructions for placing drainage beakers and cleaning measuring utensils.
Instructions for preparing pure solvent S-316 as zero liquid for calibration.
Instructions for preparing span liquid for calibration, including using B-heavy oil.
Provides important cautions and tips for accurate calibration, including temperature and handling.
Lists checks required before performing zero and span calibration.
Details the step-by-step procedure for performing automatic zero calibration.
Provides the procedure for performing automatic span calibration.
Lists important cautions for accurate measurement, including environmental and handling advice.
Covers removing fine particles and performing preliminary extraction outside the product.
Explains automatic measurement, including deciding extraction time.
Details the step-by-step procedure for semi-automatic measurement.
Explains how to access the data management menu from the Data Top screen.
Shows the current alarms and provides buttons for navigation.
Displays a list of past measurement history and navigation buttons.
Provides a menu for USB memory operations like saving data.
Details the available measurement settings and their ranges.
Details the available system settings like language, date, and time.
Describes how to set the concentration of the span liquid for calibration.
Describes how to set the calibration mode (AUTO or MANUAL).
Lists maintenance items, their intervals/frequency, and corresponding pages.
Details the procedure for rinsing the product's flow paths after use.
Details the procedure for replacing the water filter element.
Details the procedure for drying the measurement cell if it becomes wet.
Explains how alarms are displayed and how to check current alarms.
Lists various display messages, their descriptions, causes, and recommended actions.
Provides corrective actions for problems not shown by alarms.
Provides information about the product, including its measurement principle and infrared absorption.
Details the characteristics, properties, and reclamation of Solvent S-316.
Provides answers to common questions about solvents and measurements.
Lists detailed technical specifications of the OCMA-500.
Lists optional parts available for the OCMA-500.
To Next Page