HOS Orbot - Accessories and Applications; HOS Driver Plates; HOS Standard Driver Plate; HOS Stoneflash Driver Plate

12
Fig. 34 Fig. 35 Fig. 36
IMPORTANTSAFETYINSTRUCTION:Tightenthescrewssufcientlytoavoiddisengagementofthedriver
plate from the machine base during operation.
To avoid stripping the screws do not over tighten. An electric screwdriver with a clutch will ensure that
stripping will not occur.
AccEssORIEs AND APPLIcATIONs
WARNING:NeverstoretheHOSaccessoriesinwetconditions!KeeptheHOSaccessoriesawayfrom
extremeheatandfromchemicals!
HOS Driver Plates
WARNING:ExclusivelyuseORBOTSprayBorgdesigneddriverplatesonly.TheuseofothernonHOSdriver
plates will damage the machine and its mechanical action.
The driver plates are fastened on the machine base with four countersink screws. For more information on
how to change the driver plate see page 11.
HOS Standard Driver Plate
 • TheHOSstandarddriverplate(15”indiameter/38cm)issuppliedasastandardwiththeORBOT
SprayBorg.ItissuitablefortheusewithallHOSpadsfortextileandhardoorapplications.
 • TheHOSpadscanbeeasilyattachedandremovedfromtheVelcrodriverdisc.Moreinformation
onhowtheexchangethepadscanbefoundonpage11.
 • Afterfrequentuse,lintwillsticktotheVelcrosurfaceofthedriverplate,whichhindersasecure
attachment of the cleaning pads and will increase wear and tear to the pads.
 • ChangetheHOSVelcrodriverdiscoftenasneededtoavoidproblemsasdescribedonpage16.
HOS StoneFlash Driver Plate
 • TheHOSStoneFlashdriverplateisparticularlywellsuitedfortheusewiththeHOSStoneFlash
padsduetoitscatchyVelcrohooksurface.Thetextureofthesurfaceimprovestheadhesionand
thus promotes the longevity of the pads.
HOS Lippage Driver Plate
 • EightinterchangeablediamonddiscsaremountedtotheHOSlippagedriverplate.Thesediscs
stick to a Velcro surface and can be changed by levering them out of their indentation with a
suitable tool.
 • Dependingontheoortypeandthedesiredresults,diamonddiscsofvariousgritlevelscanbe
chosen.
 • Lippagedriverissuitedforthelevelingofunevenstoneoors.Lippage,deepscratchesand
impurities can be removed.
 • Thelippagedriverplateshouldberinsedaftereachapplication.