EasyManua.ls Logo

HotSpring ARIA AR - User Manual

HotSpring ARIA AR
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Highlife
™
Collection

Table of Contents

Questions and Answers

  • T
    Tracy MunozAug 20, 2025
    What to do if my HotSpring ARIA AR is not heating up, but the jets and light are working?
    • C
      caseyreidAug 20, 2025
      If your HotSpring Hot Tub isn't heating up, but the jets and light are working, with the Green logo "Ready" and Blue logo "Power" indicators blinking, it could be due to an open integrated pressure switch or a tripped circulation pump thermal cut-off. Here’s what you should do: * Check for clogged filters. The integrated pressure switch will reset when the flow of water through the heater has been restored. Call for service if the heater trips frequently. * Check for clogged filters or air locks in plumbing. Disconnect power to the spa and allow the circulation pump to cool. The circulation pump thermal cut-off will reset when the pump has cooled and power is reapplied. Call for service if the circulation pump thermal cut-off trips frequently.
  • J
    jimsmithAug 22, 2025
    What to do if my HotSpring Hot Tub has a water odor?
    • J
      Jerry BartlettAug 22, 2025
      If your HotSpring Hot Tub has a water odor, it could be due to excessive organics in the water, improper sanitization, or low pH. Here's what you can do: * Shock the spa with sanitizer. * Add sanitizer. * Adjust the pH to the recommended range.
  • J
    Jennifer ColeAug 25, 2025
    What to do if my HotSpring Hot Tub has a chlorine odor?
    • L
      longroseAug 25, 2025
      If your HotSpring Hot Tub has a chlorine odor, it could be due to a high chloramine level or low pH. To fix this, shock the spa with sanitizer and adjust the pH to the recommended range.
  • V
    Veronica ArellanoAug 26, 2025
    What to do if my HotSpring ARIA AR is inoperative?
    • B
      Brent PhelpsAug 26, 2025
      If your entire HotSpring Hot Tub is inoperative, it could be due to a power failure, a tripped GFCI, a tripped heater high-limit thermostat, or the spa lock being activated. Here's what you can do: * Check the power source. * Reset the GFCI. If it won't reset, call for service. * Disconnect power for at least thirty seconds to reset the heater high limit. Check for clogged filters. If tripping continues, call for service. * Deactivate the spa lock.
  • D
    debra00Aug 27, 2025
    What to do if my HotSpring ARIA AR has algae growth?
    • J
      Jonathan PerezAug 27, 2025
      If you notice algae growth in your HotSpring Hot Tub, it's likely due to high pH or low sanitizer levels. You can address this by shocking the spa with sanitizer and adjusting the pH, and by shocking the spa with sanitizer and maintaining the sanitizer level.
  • E
    Eric RoseAug 29, 2025
    Why are the jets weak in my HotSpring ARIA AR Hot Tub?
    • M
      Mary TurnerAug 29, 2025
      Weak or surging jets in your HotSpring Hot Tub can be caused by a low water level, clogged filters, or a closed Comfort Control lever. To fix this, add water, clean the filters, or open the Comfort Control lever.
  • L
    Lynn DiazAug 31, 2025
    Why is the Green Logo "Ready" indicator blinking on my HotSpring Hot Tub?
    • J
      Jacqueline EvansAug 31, 2025
      If the Green Logo "Ready" indicator is blinking on your HotSpring Hot Tub, it indicates a temperature sensor problem. To resolve this, disconnect power for at least thirty seconds. If the blinking continues, call for service.
  • K
    Karen MitchellSep 2, 2025
    Why is the Blue Logo "Power" indicator blinking on my HotSpring ARIA AR Hot Tub?
    • W
      Wayne JonesSep 2, 2025
      If the Blue Logo "Power" indicator is blinking on your HotSpring Hot Tub, it means the heater high-limit thermostat has tripped. To fix this, disconnect power for at least thirty seconds to reset the heater high limit. If it won't reset, check for clogged filters. If tripping continues, call for service.
  • I
    inguyenSep 4, 2025
    What to do if my HotSpring ARIA AR Hot Tub light is inoperative?
    • R
      rmillerSep 4, 2025
      If the light in your HotSpring Hot Tub is inoperative, it could be due to the spa lock being activated or a faulty light wiring or assembly. To resolve this, deactivate the spa lock or replace the light assembly.
  • M
    Melissa LeonardSep 6, 2025
    What to do if my HotSpring Hot Tub water smells musty?
    • J
      jeffrey30Sep 6, 2025
      If your HotSpring Hot Tub has a musty odor, it's likely due to bacteria or algae growth. Shock the spa with sanitizer. If the problem is visible or persistent, drain, clean, and refill the spa.

Summary

Safety Information

Important Safety Instructions

Read and follow all safety instructions carefully to prevent accidents and injuries.

Avoiding the Risk to Children

Precautions to prevent child drowning and injury. Ensure supervision at all times.

Avoiding the Risk of Electrocution

Safety measures to prevent electric shock, including grounding and GFCI usage.

Risks to Avoid

Warnings about suction fittings, slippery surfaces, infectious diseases, and moving parts.

Unclean Water

Avoiding the Risk of Hyperthermia

Risks associated with prolonged immersion in hot water.

To Reduce the Risk of Injury

Guidelines on safe water temperatures and avoiding strenuous exercise before use.

Avoiding the Risk of Skin Burns

How to test water temperature and ensure comfort before entering the spa.

Important Spa Instructions

Key instructions for spa use, maintenance, and care.

Getting Started

Spa Features

Identification and description of various spa components and jets.

Quick Start-Up Instructions

Steps to follow before filling the spa and initial setup.

Quick Start-Up Instructions (Continued)

Detailed steps for spa start-up, including filling and chemical adjustment.

Water Quality and Maintenance

Basic Information

Importance of clean water and essential maintenance practices.

Chemical Safety

Guidelines for safe handling and use of spa chemicals.

How to Add Chemicals to the Water

Procedure for adding chemicals into the filter compartment.

Fundamentals of Water Maintenance

Key principles of testing, filtration, and chemical balance for spa water.

Water Quality Chart

The Hot Spring Spa Water Maintenance Program

Overview of the spa's water care system and program.

Filling the Spa with Water

Adding Chemicals to the Water

How to add chemicals safely into the filter compartment.

Building a Sanitizer Routine

Performing Super Chlorination; Non-Chlorine Shock Treatment

Procedure for super chlorination or shock treatment.

Manual Chlorine (Sodium Dichlor)

Vacation Water Care Instructions

Operating Instructions

Main Control Panel

Overview of the main control panel layout and buttons.

Indicator Lights

Temperature Control

How to set and adjust the spa water temperature.

Locking Features

Temperature Lock

Spa Lock

Jets Control

Light Control

Spa Care and Maintenance

Drain & Refill Instructions

Step-by-step guide for draining and refilling the spa.

Prevention of Freezing

Winterizing Your Spa

Instructions for preparing the spa for winter.

Opening Instructions

Filter System

Filter Cartridges Removal & Cleaning

Care of the Exterior

Spa Shell

Care of the Spa Cover

Vinyl Cover

How to Open the Vinyl Cover

How to Close the Cover

Electrical Requirements

230 Volt Permanently Connected Models

Electrical requirements for 230V permanently connected spa models.

Vanguard (Model VV) and Sovereign (Model II) 230 Volt Permanently Connected Models

Wiring diagram for specific 230V models.

Vista (SS), Grandee(GG), Envoy (KK),& Aria (AR) 230 Volt Permanently Connected Model

Wiring diagram for specific 230V models.

115;230 Volt Convertible Models

115 Volt GFCI

Explanation of the 115V GFCI and testing procedure.

115 Volt Operation (60 Hz Only)

Requirements for 115V operation and dedicated circuits.

Never Connect the Spa to an Extension Cord!

Warning against using extension cords for spa power.

Installation Instructions

Guidelines for installing the 115V power cord and outlet.

230 Volt Conversion Instructions

Steps for converting a spa from 115V to 230V operation.

Wiring Connections

General wiring connections and GFCI testing for 230V converted models.

Prodigy (Model H) and Jetsetter (Model JJ) 230 Volt Converted Models

Wiring diagram for Prodigy and Jetsetter 230V models.

Service Information

General Information

GFCI and High Limit Thermostat

Troubleshooting GFCI trips and high limit thermostat issues.

No-Fault Heater and Integrated Pressure Switch

Silent Flo 5000 Circulation Pump and Circulation Pump Thermal Cut-Off

Troubleshooting the circulation pump and thermal cut-off.

Miscellaneous Service Information

Troubleshooting

General Operation Troubleshooting Guide

Table of common operational problems and their causes/solutions.

Spa Water Maintenance Troubleshooting Guide

Table of water quality problems and their causes/solutions.

HotSpring ARIA AR Specifications

General IconGeneral
Seating Capacity5 adults
PumpWavemaster® 9000
Filtration SystemTri-X® Filters
Control SystemIQ 2020®
Warranty5 years

Related product manuals