What to do if my HotSpring Envoy KK water is causing eye irritation?
If you're experiencing eye irritation from your HotSpring Hot Tub water, it could be due to low pH or low sanitizer levels. Adjust the pH, and shock the spa with sanitizer and maintain the sanitizer level.
How to fix organic buildup around my HotSpring Hot Tub?
Organic buildup or a scum ring around your HotSpring Hot Tub is caused by a build-up of oils and dirt. Wipe off the scum with a clean rag. If it's severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and refill the spa.
What to do if my HotSpring Hot Tub water is causing skin irritation or rash?
If you're experiencing skin irritation or a rash from your HotSpring Hot Tub water, it could be due to unsanitary water or a free chlorine level above 5 ppm. Shock the spa with sanitizer and maintain the sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the spa.
What to do if my Moto-Massage® jet is inoperative in my HotSpring Envoy KK?
If the Moto-Massage® jet in your HotSpring Hot Tub is inoperative or erratic, it could be due to closed Comfort Control valves or clogged filters. To resolve this, open the Comfort Control levers and clean the filters.
How to remove stains in my HotSpring Envoy KK Hot Tub?
Stains in your HotSpring Hot Tub can be caused by total alkalinity and/or pH being too low, or high iron or copper in the source water. Adjust the total alkalinity and/or pH. You can also use a metal deposit inhibitor.
How to remove scale from my HotSpring Envoy KK?
Scale in your HotSpring Hot Tub is caused by high calcium content in the water, and total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale requires removal, drain the spa, scrub off the scale, refill the spa, and balance the water.
Read and follow all safety instructions to prevent injury or drowning.
DANGER: Ensure children are supervised to prevent drowning risk.
DANGER: Follow electrical safety guidelines to prevent shock.
WARNING: Avoid prolonged immersion in hot water to prevent hyperthermia.
Follow temperature limits and avoid slippery surfaces.
Test water temperature before entering to prevent burns.
Detailed instructions for successful spa start-up and initial filling.
Testing, filtration, and maintaining balanced water chemistry.
Setting temperature, Temperature Lock, and Spa Lock.
Operating the spa jets using the main and auxiliary controls.
Operating the underwater and additional spa lights.
Step-by-step guide for draining and refilling the spa.
Wiring requirements for 230V permanently connected models.
Wiring diagrams for specific 230V models.
Testing and requirements for 115V GFCI protected circuits.
Prohibition against using extension cords for spa power.
Step-by-step guide for converting a spa from 115V to 230V.
Diagrams and instructions for wiring 230V models.
Troubleshooting GFCI trips and high limit thermostat problems.
Troubleshooting the circulation pump and its thermal cut-off.
Conditions that void warranty, liability limitations, and disclaimers.
Common operational issues and their solutions.
Troubleshooting common spa water quality issues.
Conditions that void warranty and legal disclaimers.
To Next Page
General