HotSpring LimeLight FLAIR User Manual

Page 17
Operating Instructions
TO PAUSE/PLAY (SONG)
• Press the soft button next to
PLAY/PAUSE (top right corner) to play or
pause music.
• Press the Function:PLAY/PAUSE
soft button to advance to the TRACK
function screen.
NOTE: Some audio sources will display
song title.
• Press the Function:SET soft button to
advance to the Forward function screen.
TO CHANGE TRACK (SONG)
• Press the FORWARD or BACK soft
buttons to change the track (song).
• Press the Function:TRACK soft
button to advance to the SETUP
function screen.
• Press the Function:SET soft button to
advance to the Enter Setup screen.
TO GO TO SETUP MENU
• Press the ENTER SETUP soft button to
scroll to the SETUP SOURCE screen.
IMPORTANT: If the Function: SETUP
soft button is pressed, the screen will
advance back to the Volume screen.
Press the Back hard button to exit audio
screens if desired.
TO CHANGE AUDIO SOURCE
• This Source screen illustrates the current
audio source the spa is using.
• Press ▲ or ▼ soft buttons to change
the desired source: TV, AUX or
Bluetooth
®
.
To use the Bluetooth screen, your audio
Bluetooth device must be paired with the
spa.
TO ADJUST TREBLE
• Press SETUP SOURCE soft button to
advance to the SETUP Tone, Treble
screen.
• Press the soft button next to ▲ or ▼ to
change the Treble between -5 and +5.
• Press SETUP Tone,Treble soft
button to advance to the Tone, Bass
screen.
TO ADJUST BASS
• Press the soft button next to ▲ or ▼
to change the Bass between -5 and
+5.
• Press SETUP Tone,Bass
soft button to advance to the
BALANCE screen.
TO ADJUST BALANCE
• Press the soft button next to ▲ or ▼
to change the Balance between -5
and +5.
• Press SETUP Balance soft button
to advance to the Subwoofer
Volume screen.
TO ADJUST SUBWOOFER
• Press the soft button next to ▲ or
▼ to change the Subwoofer Volume
between 0 and 11.
• Press SETUP Subwoofer soft
button to advance to the Reset
screen.
TO DISCONNECT BLUETOOTH (RESET)
• Press the soft button next to Reset
to disconnect any device using the
spa music system so that another
paired device may be used. This is
also necessary when trying to pair
multiple devices because pairing is
NOT possible when another device
is connected to the music system.
• Press SETUP Music Status soft
button to advance to the Pair screen.
• To pair, press PAIR soft button
followed by pressing "connect"
next to My Spa BTXR on your
device.
IMPORTANT: Use the BACK hardbutton
to go back to the Function:SET screens
if desired.

HotSpring LimeLight FLAIR Specifications

General

Brand	HotSpring
Model	LimeLight FLAIR
Category	Hot Tub
Language	English