Page 41
SPA SPECIFICATIONS
Spa Model Footprint
Dimension
Height Effective
Filter
Area
Heater
(Watts)
Water
Capacity
Dry
Weight
Filled
Weight*
Dead
Weight*
Electrical Requirements
GLEAM
(Model GLME)
Seats 8
Adults
2.79 m
x
2.31 m
97 cm 9.3 m
2
1,500 1,925 liters 575 kg 3,140 kg 575 kg/m
2
220 - 240 volt,
16 & 25 amp¹ Single
phase GFCI ² protected
circuit
PULSE
DL
(Model PLSDE)
Seats 5
Adults
2.26 m
x
2.26 m
97 cm 6 m
2
1,500 1,450 liters 450 kg 2,300 kg 540 kg/m
2
220 - 240 volt,
20 amp¹ Single phase
GFCI ² protected circuit
PULSE
(Model PLSE)
Seats 7
Adults
2.26 m
x
2.26 m
97 cm 6 m
2
1,500 1,450 liters 450 kg 2,460 kg 575 kg/m
2
220 - 240 volt,
20 amp¹ Single phase
GFCI ² protected circuit
FLAIR
(Model FLRE)
Seats 6
Adults
2.13 m
x
2.13 m
91 cm 6 m
2
1,500 1,175 liters 420 kg 2,075 kg 550 kg/m
2
220 - 240 volt,
20 amp¹ Single phase
GFCI ² protected circuit
BOLT
(Model BLTE)
Seats 4
Adults
2.03 m
x
2.03 m
84 cm 6 m
2
1,500 1,100 liters 320 kg 1,740 kg 490 kg/m
2
220 - 240 volt,
20 amp¹ Single phase
GFCI ² protected circuit
GLOW
(Model GLWE)
Seats 4
Adults
1.93 m
x
2.13 m
84 cm 6 m
2
1,500 1,025 liters 320 kg 1,665 kg 490 kg/m
2
220 - 240 volt,
20 amp¹ Single phase
GFCI ² protected circuit
1 The current rating (Amps) may vary, depending on the country. Contact your HOT SPRING dealer for specific information regarding your spa model.
2 The GFCI may also be referred to as an ELCB (Earth Leakage Circuit Breaker) or as an RCD (Residual Current Device).
CAUTION: Watkins Manufacturing suggests a structural engineer or contractor be consulted before the spa is placed on an elevated deck.
* NOTE: The “Filled weight” and “Dead weight” of the spa includes the weight of the occupants (assuming an average occupant weight of 80 Kg [175 lbs]).
Service Information
To Next Page
Loading...
Need help?
General