What to do if my HotSpring PRODIGY H water is causing eye irritation?
If you're experiencing eye irritation from your HotSpring Hot Tub water, it could be due to low pH or low sanitizer levels. Adjust the pH, and shock the spa with sanitizer and maintain the sanitizer level.
How to fix organic buildup around my HotSpring Hot Tub?
Organic buildup or a scum ring around your HotSpring Hot Tub is caused by a build-up of oils and dirt. Wipe off the scum with a clean rag. If it's severe, drain the spa, use a spa surface and tile cleaner to remove the scum, and refill the spa.
What to do if my HotSpring PRODIGY H water is causing skin irritation or rash?
If you're experiencing skin irritation or a rash from your HotSpring Hot Tub water, it could be due to unsanitary water or a free chlorine level above 5 ppm. Shock the spa with sanitizer and maintain the sanitizer level. Also, allow the free chlorine level to drop below 5 ppm before using the spa.
What to do if my Moto-Massage® jet is inoperative in my HotSpring Hot Tub?
If the Moto-Massage® jet in your HotSpring Hot Tub is inoperative or erratic, it could be due to closed Comfort Control valves or clogged filters. To resolve this, open the Comfort Control levers and clean the filters.
How to remove stains in my HotSpring PRODIGY H Hot Tub?
Stains in your HotSpring Hot Tub can be caused by total alkalinity and/or pH being too low, or high iron or copper in the source water. Adjust the total alkalinity and/or pH. You can also use a metal deposit inhibitor.
How to remove scale from my HotSpring PRODIGY H Hot Tub?
Scale in your HotSpring Hot Tub is caused by high calcium content in the water, and total alkalinity and pH being too high. Adjust the total alkalinity and pH. If scale requires removal, drain the spa, scrub off the scale, refill the spa, and balance the water.
Read and follow all safety instructions for proper spa use and risk prevention.
Measures to prevent child drowning and ensure supervision when using the spa.
Electrical safety precautions, grounding, GFCI testing, and wiring guidelines.
Warnings on suction fittings, slipping, medication effects, and health conditions for spa use.
Recommendations on water temperature limits and usage to prevent injury and burns.
Initial steps for filling the spa, operating water features, and preparing for use.
Step-by-step instructions for filling, initial setup, and water balancing.
Understanding key water parameters like pH, alkalinity, and hardness for spa balance.
How to control spa temperature and activate temperature/spa lock functions.
Wiring instructions for 230 volt permanently connected spa models.
Details on 115V GFCI testing and safe operation guidelines.
Step-by-step guide for converting spa wiring from 115V to 230V.
Installation requirements for 115V models and conversion steps.
Wiring diagram for Prodigy and Jetsetter models converted to 230V.
Troubleshooting GFCI, high limit thermostat, and No-Fault heater problems.
Troubleshooting common spa operation issues like no power or weak jets.
Resolving issues like cloudy water, odors, and skin irritation.
To Next Page
General