Need help?Do you have a question about the HOUNO CPE 1.06 and is the answer not in the manual?
Details the warranty coverage for oven parts, heating elements, and door glass.
Location and importance of the oven's approval plate for identification.
HOUNÖ Technical Support contact details for assistance.
Guidance on safe handling and removal of packaging materials.
Proper placement and leveling of the oven for correct function and ventilation.
Requirements and procedures for connecting the oven to the water supply.
Guidelines for connecting the oven's drain system to a suitable outlet.
Procedure for electrical connection and table of supply line specifications.
Checks for external damage, leveling, and door adjustment.
Verification of water, electrical, trip tray, exhaust, and drain connections.
Checks for filter housing, interior light, and cleaning.
Checks and adjustments for preset values and initial heating.
Checks related to water, electrical, and drain connections, and oven positioning.
Checks for door closing device, catch, sealing, hinging, and interior glass.
Checks for interior light, jets, fan, and heating element.
Checks of drain system, condensation jet, drain sensor, drip tray, and slide.
Checks of heating elements, load distribution, wiring, motors, and fans.
Checks for steam generator heating elements, sensors, and drain pump.
Tests for components, probes, operation modes, and combiwash.
Controls for moving between functions and adjusting time/temperature.
Navigation to the main menu and preset cooking programs.
Control for switching the oven on and off.
Navigation back to the initial start screen.
Navigation to the oven configuration settings.
Navigation to the service and maintenance functions.
Function to enter specific codes for access.
Function to change the oven's display language.
Configuration settings for network connectivity.
Configuration for alarm sound settings.
Function to set the oven's internal clock.
Access to detailed oven configuration menus.
List of selectable display languages for the oven interface.
Setting the oven's IP address for network communication.
Setting the network subnet mask for IP addressing.
Configuring the default gateway for network access.
Setting the Simple Mail Transfer Protocol server address.
Diagram illustrating network setup with the oven and specific IP configuration.
Credentials for accessing the CombiNet system.
Diagram for direct network connection to a computer.
Controls for decreasing and increasing sound volume and frequency.
Function to test the current sound settings.
Controls for navigating and adjusting date and time values.
Configuration for oven light behavior and screen saver.
Settings for startup mode, permissions, and temperature differences.
Settings for external ventilation and manual steam injection.
Functions related to USB key operations like backup and restore.
Procedure for diagnosing and managing lime-scale buildup.
Process for updating oven software via HOUNÖ server or USB.
Procedure for calibrating the oven's ClimaOptima system.
Procedure for calibrating the oven door sensors.
Access to view energy consumption and operational counters.
Access to advanced technical service functions.
Creating and restoring oven configuration and program backups.
Importing and exporting recipes to and from a USB drive.
Selecting a backup file to restore for the oven.
Confirming the selected backup file for the restoration process.
Selecting specific features (recipes, counters, etc.) to restore from backup.
Function to test the USB memory key's integrity.
Function to delete all contents from the USB key.
Shows the oven's total power consumption since last reset.
Shows power consumption since the last trip reset.
Date and time of the last reset for counters.
Function to reset the trip counter.
View the log of recorded errors.
View statistics on error occurrences.
View operational counters for oven components.
Control to move to the next page of the error log.
Function to reset the error statistics data.
Indicates the activation count for specific units.
Indicates the total active time for specific units.
Function to reset all service counters.
Displays the current level of lime-scale in the system.
Initiates the descaling procedure for the oven or steam generator.
Initiates software update from the HOUNÖ server.
Initiates software update using a USB drive.
Conditions and triggers for performing calibration.
Detailed steps with time, temperature, and settings for calibration.
Initiates the door sensor calibration process.
Explanation of the automatic set point finding during calibration.
Guidelines for interpreting door sensor measurement values.
Initiating the calibration sequence.
Procedure for closing the door and confirming calibration.
Access to various diagnostic test routines for oven components.
Displaying and modifying the oven's configuration settings.
Function to enter or view the oven's serial number.
Option to select or update the oven's boot logo.
Function to update language files.
Diagnostic tests for the main oven functions.
Diagnostic tests for the oven fan.
Diagnostic tests for the steam generator.
Diagnostic tests for the CombiWash function.
Access to other diagnostic tests.
View status of thermo-switch circuits.
Tests for main contactor, heating element, and cooling fan.
Tests for cooling fan and exhaust motor.
Tests for condensation jet, oven chamber jet, and interior lighting.
Tests for low/high fan speed and left/right rotation.
Function to stop the fan motor.
Activating the main contactor for fan operation.
Controls for increasing and decreasing fan motor speed.
Setting and confirming the water level for the steam generator.
Testing the filling jet and drain pump for the steam generator.
Displaying current steam generator temperature and water level.
Testing the detergent and rinse aid pumps for CombiWash.
Testing the water solenoid valve.
Displaying the status of the water pressure sensor.
Tests for external ventilation terminals 1 and 2.
Testing the restart lamp and displaying restart status.
Displaying voltage from the ClimaOptima pressure sensor.
Displaying temperatures from core probes 1 and 2.
Displaying temperatures of IO board and CPU.
Testing the main contactor's status.
Displaying the status of thermo-switches for various components.
Fields for entering the oven's serial number digits and characters.
Displays current oven features like generation, type, size, and enabled functions.
Choosing the older generation of Visual Cooking.
Choosing the newer generation of Visual Cooking.
Selection of the specific oven model (BPE, CPE, KPE).
Selection of the oven's physical size (e.g., 1.06, 1.10, 2.14).
Setting to identify if the oven is a pass-through model.
Settings for the oven's restart button type and restart time.
Settings to enable/disable core temperature probes 1 and 2.
Selection for specific regional or special oven setups.
Settings for default user login and starting in recipe mode.
Settings to enable or disable CombiNet and HACCP logging.
Setting for additional fan speed options.
Configuration for water hardness and detergent monitoring.
Settings for clock display format and temperature unit.
Displays final oven features like generation, type, size, and enabled functions.
Options to choose a boot logo from available selections.
Oven behavior after downloading and restarting with a new logo.
Choosing the font for the selected language.
Controls for moving up and down through language options.
Code for Super User access.
Code for Service Engineer access.
Fields for recording serial number, installer, and installation date.
Service engineer's and customer's signature and date fields.
Minimum required distances around the oven for access.
Checks for proper drain tube connection and fall.
Checks for correct voltage and water pressure compliance.
Checks for electrical/water connections and overall operability.
Fields for customer information and instruction details.
Confirmation of customer training on oven use, cleaning, and maintenance.
Sales person's and customer's signature and date fields.
Settings for oven light, screen saver, menu start, and startup permission.
Settings for Delta T, Cook & Hold, and temperature units.
Settings for steam injection intervals and ventilation speeds.
Settings for custom modes, recipes, and fan frequency inverter.
Settings for fan voltage, temperature differences, preheat, CombiNet, and more.
Settings for temperature offsets, fan alarms, restart, and descaling.
General| Brand | HOUNO |
|---|---|
| Model | CPE 1.06 |
| Category | Commercial Food Equipment |
| Language | English |
To Next Page
