Hover-1 REBEL - Package Contents

The Rebel hoverboard is a personal transporter. Our production processes
are developed with strict testing for each hoverboard. Operating the
hoverboard without following the contents of this manual may lead to
damage to your hoverboard or bodily injury.
PACKAGE CONTENTS
• Hover-1 Rebel Hoverboard
• Charger & Charging Cable
• Operation Manual
FEATURES/PARTS
1. Fender 5. Tire
2. Left Foot Mat 6. Protective Chassis Casing
3. Battery Indicator 7. Charge Port (on back)
4. Right Foot Mat 8. Power Button (on back)
OPERATING PRINCIPALS
The Rebel uses digital electronic gyroscopes and acceleration sensors to
control balance and motion, depending on the user's center of gravity.
The Rebel also uses a control system to operate the motors that are
located within the wheels. The Rebel has a built-in inertia dynamic
stabilization system that can assist with balance when moving forward
and backward, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when entering a
turn at higher speeds.
Model: H1REBL
Net Weight: 13.23 lbs (6 kg)
Max Supported Weight: 130 lbs (60 kg)
Min Supported Weight: 44 lbs (20 kg)
Motor: 220W (dual 110W motors)
Max Speed: Up to 6 mph (9.7 km/h)
Max Range: Up to 3 miles (4.8 km)
Max Incline Angle: 5°
Minimum Turning Radius: 0°
Charge Time: Up to 7 hours
Battery Type: Lithium-ion
Battery Voltage: 25.2V
Battery Capacity: 2Ah
Power Requirement: AC 100V240V, 50Hz/60Hz
Ground Clearance: 1.2 Inches (3.05 cm)
Platform Height: 4.5 Inches (11.43 cm)
Tire Size: 6.5 Inches (16.51 cm)
Tire Type: Non-Pneumatic Solid Tires
UL Certiication: UL2272 certiied
INTRODUCTION
1
5
7 8
2
3
4
6
4