20
Chapter 2
D82008204 REV B 1/14/04
CSB/prism 2404 Charger
1. Turn the red power switch to the power on position. A red light will illuminate
indicating power is available. If the red light does not go on, please check
to make sure the household power is working.
2. The green charge indicator light on the front panel will illuminate indicating
the batteries are being charged. If the green light is not lit, it means the
batteries or the charger are not connected. Please check all connections and
proceed.
3. When the green light goes out, the batteries are charged.
4. Please note the charger will get hot to the touch during operation.
This is normal. Make sure delicate surfaces are protected with a pad between
the charger and the surface.
To Next Page
Loading...
