To view the LEDs, access the HP Systems Insight Display.
StatusDescriptionItem
To determine Power cap status, see HP Systems
Insight Display LEDs and Internal Health LED
Combinations.
Power cap LED
Green = Network link existsNIC LEDs1
Flashing green = Network link and activity exist
Off = No link to network exists
If power is off, the front panel LED is not active. For
status, see Rear Panel LEDs and Buttons.
Green = AMP mode enabledAMP status2
Amber = Failover
Flashing amber = Invalid configuration
Off = AMP mode disabled
Amber = FailureAll other LEDs
Off = Normal.
For possible failure causes, seeHP Systems Insight
Display LEDs and Internal Health LED Combinations.
VLS Node Components, LEDs, and Buttons 151
To Next Page
Loading...
