B Specifications
This section provides the VLS node and Ethernet switch specifications.
VLS Node
ValueSpecification
4.32 cm (1.70 in)Height
69.53 cm (27.38 in)Depth
42.62 cm (16.78 in)Width
15.97 kg (35.20 lb)Weight (maximum: two processors, two power
supplies, eight hard drives)
14.51 kg (32.00 lb)Weight (minimum: one processor, one power
supply, no hard drives)
14.06 kg (31.00 lb)Weight (no drives installed)
Ethernet Switch 2510–24 Specifications
SpecificationItem
9.3 x 17.42 x 1.73 in. (23.62 x 44.25 x 4.39 cm) 1U heightDimensions
4.9 lb (2.2 kg) fully loadedWeight
24 RJ-45 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type
100Base-TX); 1 RJ—45 serial console port; 2 dual-personality ports,
Ports
each of which can be used as either an RJ-45 10/100/1000 port or
an open mini-GBIC slot (for use with mini-GBIC transceivers)
MIPS, 264 MHzProcessor
8 MBFlash capacity
64 MBRAM/ROM capacity
384 KBPacket buffer size
< 4.9 µs (64-byte packets)Latency (100 Mb)
< 2.6 µs (64-byte packets)Latency (1000 Mb)
6.5 million pps (64-byte packets)Throughput
8.8 GbpsSwitching capacity
8000 entriesMAC address table size
68 BTU/hrMaximum heat dissipation
100-127 VAC/200-240 VACVoltage
0.75 A /0.4 ACurrent
20 WPower
50/60 HzFrequency
178 Specifications
To Next Page
Loading...
