HP 12000 - Window Regions; Opening a Command View VLS Session from a Web Browser

• Installing VLS firmware updates
• Saving and restoring VLS network settings and virtual library configurations
• Restarting VLS device emulations and Command View VLS
• Viewing and saving VLS trace log files
Command View VLS is installed on the VLS and communicates through the LAN. Users can open
a Command View VLS session from a web browser on the LAN, or HP Systems Insight Manager.
Window Regions
Command View VLS windows consist of five regions. Not all regions are displayed on all windows.
DescriptionItem
status banner1
task bar2
status pane3
notifications pane4
navigation tree5
NOTE: You can enlarge or reduce any region on the window. To change the size of a region,
position your cursor on the border of a pane, and press the left mouse button while simultaneously
dragging the border.
Opening a Command View VLS Session from a Web Browser
NOTE: Before you can open a Command View VLS session, you must set the VLS network settings.
See “Setting the Network Settings” (page 83).
To open a Command View VLS session from a web browser:
1. Launch a web browser.
2. In the web browser URL box, enter:
https://<fully qualified name of the VLS>
Command View VLS 79